YouChoos

YouChoos Products

Be inspired - you could enhance your own models just like the ones listed here!

Example N Gauge Diesel/Electric Locomotives

YouChoos Products

'N' Gauge Diesel/Electric
	Graham Farish Class 04 Standard DCC conversion.
	Graham Farish Class 08 DCC is easy enough, and DCC sound is just about possible too!
	Graham Farish Class 14 'Teddy Bear' A very small DCC decoder required.
	Dapol Class 35 A squeeze for DCC sound, but we've done it!
	Graham Farish Class 37 Who said sound couldn't be squeezed in?! Sound, cab lights, crew!
	Graham Farish Class 42 'Warship' DCC sound and lights all neatly tucked in.
	Graham Farish Class 44/45/46 'Peak' DCC sound, head/tail lights, cab lights and crew - in an old Poole model - yes it is possible!
	Graham Farish Class 47 CT DCC sound, cab lights and crew
	Graham Farish Class 52 'Western' No sound, but everything else - head/tail lights, cab, crew, cab lights.
	Farish Deltic Class 55/DP1 Prototype Yes, the bright blue noisy brute, with DCC sound, lights, cab lights and crew.
	Graham Farish Class 60 Standard DCC is a doddle, and DCC sound feasible with some effort.
	Graham Farish Class 66 DCC sound fits in fairly easily with a CT micro-cube speaker.
	Dapol Class 67 DCC sound in this brute.
	Dapol Class 73 Standard DCC easy enough in this ageing model.
	Dapol Class 86 Sound in a Dapol? Not a problem sir!
	Dapol Class 156 DMU Dapol DMU with a lift!
	Graham Farish Blue Pullman DMU Deafening sounds with dual sound decoders in the beautifully made Farish Blue Pullman.
	Dapol Class 43* HST DMU A solid model from Dapol with plenty of scope for DCC sound.

YouChoos Gallery

Graham Farish Deltic DP1 Prototype Diesel/Electric

The pre-cursor to the Class 55 Deltic, this is the now well-known DP1 Prototype diesel/electric loco in striking bright blue. Perhaps not everyone's favourite colour (a little too American?!), but no-one can deny the awesome presence that this loco had on the line. One seriously noisy brute!

While it is impossible to make you shake off your chair using a 10x15mm 8ohm speaker, YouChoos has recreated some of the character of this beast using a CT Elektroink SL75/SL76 or Zimo MX648 decoder and the now familiar SugarCube speaker.

Lots of sound effects available including a wide range of those distinctive (but odd!) Deltic horns. The engine sounds themselves include a lengthy startup and shutdown sequence as well as some rumbling notch-up and high-speed rev engine noises.

As well as giving control of the factory-fit head/tail lights, YouChoos has added independent cab lights, some cab detailing and crew.

Thanks to Jerry Clifford for the use of his multi-award winning 2mm Fine Scale layout "Highbury Colliery" for some of the photos featured here!