We quite like this model from Heljan, though the provision for a speaker is rather limited. We choose to get creative and go
with a pair of low-profile SugarStrands instead...
No complex re-wiring to do... simply plug in the MX644D 21pin decoder and all the lighting should work as-is. We add wires to
the decoder for the stay-alive (SuperCap17000uF via SACC16 PCB), and split off the speaker wires in parallel to the pair of
SugarStrands. 2 of these 8 ohm speakers means 4 ohm in total, which is fine with the MX644D.
The speakers sit vertically, one either side... they have to be the low-profile 6mm version to do this, but together they woik
Example 2: IceCube speaker instead
Alteratively, use a single IceCube speaker in the provided speaker recess - remove teh round plastic enclosure and put an
IceCube18X13X09-1W in there instead.
Please note that these guides are provided as useful resources for you, as-is. YouChoos cannot be held responsible for
errors in the information, or for any damage caused to your models or equipment if you choose to follow any of the
steps detailed here.