Another revisit of a favourite model, the Minerva Peckett gets the MS treatment...
The model has an 8pin DCC socket, but we'll need to remove that and hard-wire in order to fit the larger MS450 decoder into it.
A Zimo MGOBLOCK stay-alive is located under the decoder platform - perfect fit, covered in Kapton to avoid shorting.
The MS450 sits on top of the platform, stay-alive connected and wires for track pickups and motor connected.
A dual SugarCube24X15X08 is protected with some kapton tape too, and secured in right up the front with a little BlackTack.
Nice snug fit, but runs and sounds excellent with this kit!
×
Disclaimer
Please note that these guides are provided as useful resources for you, as-is. YouChoos cannot be held responsible for
errors in the information, or for any damage caused to your models or equipment if you choose to follow any of the
steps detailed here.