The decoder is attached to the underside of the coal moulding with some Black Tack. The speaker is attached to the rear of the
tender and the super capacitor is attached to the speaker with Black Tack. The loco does not have very good electrical pickup
and smaller capacitors were ineffective.
The draw-bar between the loco and tender had to be bent down to make the rear driving wheels sit on the track.
The position of the NEM pocket is set back to bring it in line with the NEM standard and glued into place. This brings wagons
and carriages closer to the tender using the ROCO auto-coupler.
Photos and words kindly provided by Roger at Keen Systems.
Please note that these guides are provided as useful resources for you, as-is. YouChoos cannot be held responsible for
errors in the information, or for any damage caused to your models or equipment if you choose to follow any of the
steps detailed here.