Revisiting an older model here with Zimo MS kit. It is quite limited for space, for a smaller decoder in the boiler and
hard-wiring is the way to go...
Care must be taken to undo the speedo before removing the body.
The 8 pin DCC socket is removed and we mill the chassis top down flat, removing the screw mounts.
We test-fit our deocder, speaker and 1000uF capacitor - it is very tight, but think we can make it fit.
A bit of jiggling and shifting of the components slightly, and it all goes in. Using BlackTack and Kapton tape to tidy it all
Please note that these guides are provided as useful resources for you, as-is. YouChoos cannot be held responsible for
errors in the information, or for any damage caused to your models or equipment if you choose to follow any of the
steps detailed here.